Dimension
Overall length: 200 mm · Head width: 28 mm
2 × DimensionDetail Zoom
Combination pliers annotation template
Hand tool example for tool suppliers: 200 mm pliers with head width, a close-up of the hardened edge, a grip label and a spec table with steel and hardness.
Make it yours
Keep the layout. Add your photo and specifications.
Template overview
What this template includes
This pliers template has 5 annotations: two dimension lines, a detail zoom on the cutting edge, a feature label and a specification table. The values are examples, not measurements of your product.
Specification table
Specifications: Size: 8" (200 mm) · Material: Chrome vanadium steel · Hardness: HRC 55–60 (cutting edge)
1 × Specification tableDetail zoom
Detail zoom: Induction-hardened edge
1 × Detail zoomFeature label
Dual-colour grip: Insulated TPR
1 × Feature labelSpecifications
Example specifications
These are example values. Replace them with your product’s verified measurements and specifications.
Values shown in the image
- Overall length
- 200 mm
- Head width
- 28 mm
- Hardness
- HRC 55–60
- Cutting capacity
- Ø 2.5 mm steel wire
Dimension2
| Annotation | Value |
|---|---|
| Overall length | 200 mm |
| Head width | 28 mm |
Specification table1
| Annotation | Value |
|---|---|
| Specifications | |
| Size | 8" (200 mm) |
| Material | Chrome vanadium steel |
| Hardness | HRC 55–60 (cutting edge) |
| Surface finish | Satin nickel |
| Handle | Dual-colour TPR |
| Cutting capacity | Ø 2.5 mm steel wire |
| Packing | Blister card |
| Qty per carton | 60 pcs |
Detail zoom1
| Annotation | Value |
|---|---|
| Detail zoom | Induction-hardened edge |
Feature label1
| Annotation | Value |
|---|---|
| Dual-colour grip | Insulated TPR |
Getting started
From this example to your product
- 01
Open the template
Start with this editable example in the SizeMarker editor.
- 02
Add your product photo
Replace the image and adjust the markers to fit your product.
- 03
Check and export
Enter your actual measurements and specifications, check every label, then export.
FAQ
Frequently asked questions
What does this pliers template show?
It marks 200 mm overall length and 28 mm head width, zooms in on the induction-hardened cutting edge, labels the dual-colour grip, and lists size, steel, hardness, finish, cutting capacity and packing.
Can I use my own tool photo?
Yes. Open the template in SizeMarker, replace the photo, move the zoom area and markers onto your tool and edit the values, labels and styles. Check every value before exporting.
Does the grip label mean the pliers are rated for electrical work?
No. "Insulated TPR" is example text. Only state an insulation or voltage rating that your tool has been tested and certified for.
Make it yours
Use this template
Keep the layout. Add your photo and specifications.