Dimension
Length: 300 mm · Height: 240 mm
2 × DimensionSize Labels
LED floodlight annotation template
Outdoor lighting example: 100 W LED floodlight with length and height lines, and a spec table with depth, lumens, CCT, IP rating, beam angle and housing.
Make it yours
Keep the layout. Add your photo and specifications.
Template overview
What this template includes
This LED floodlight template has 3 annotations: length and height lines and a specification table. The values are examples, not measurements of your product.
Specification table
Specifications: Depth: 45 mm · Power: 100 W · Luminous flux: 13,000 lm
1 × Specification tableSpecifications
Example specifications
These are example values. Replace them with your product’s verified measurements and specifications.
Values shown in the image
- Length
- 300 mm
- Height
- 240 mm
- Depth
- 45 mm
- Power
- 100 W
Dimension2
| Annotation | Value |
|---|---|
| Length | 300 mm |
| Height | 240 mm |
Specification table1
| Annotation | Value |
|---|---|
| Specifications | |
| Depth | 45 mm |
| Power | 100 W |
| Luminous flux | 13,000 lm |
| Colour temperature | 5000 K |
| IP rating | IP66 |
| Beam angle | 120° |
| Housing | Die-cast aluminium |
| Working temperature | -30 ~ 50 °C |
Getting started
From this example to your product
- 01
Open the template
Start with this editable example in the SizeMarker editor.
- 02
Add your product photo
Replace the image and adjust the markers to fit your product.
- 03
Check and export
Enter your actual measurements and specifications, check every label, then export.
FAQ
Frequently asked questions
What does this LED floodlight template show?
It marks 300 mm length and 240 mm height, and lists 45 mm depth, 100 W, 13,000 lm, 5000 K, IP66, a 120° beam angle, die-cast aluminium housing and a -30 ~ 50 °C working temperature.
Can I use my own floodlight photo?
Yes. Open the template in SizeMarker, replace the photo, move the lines onto your light and edit the values, labels and styles. Check every value against your product before exporting.
Can I use these values for my product?
No. Power, lumens and the IP66 rating are examples. Only state an IP rating and photometric data your floodlight has been tested and certified for.
Make it yours
Use this template
Keep the layout. Add your photo and specifications.