Dimension
Outside dia. (OD): 280 mm · Bore Ø: 68 mm
2 × DimensionSize Labels
Brake disc annotation template
Brake disc example for auto parts suppliers: outside diameter, bore and PCD, a spec table with OE and fitment fields, and a coating label. Add your data.
Make it yours
Keep the layout. Add your photo and specifications.
Template overview
What this template includes
This brake disc template has 5 annotations: two dimension lines, a PCD diameter marker, a specification table and a feature label. The values are examples, not measurements of your product.
Specification table
Specifications: OE reference: (your OE no.) · Vehicle fitment: (your models) · Thickness / min.: 22 / 20 mm
1 × Specification tableDiameter
PCD: Ø 114.3 mm
1 × DiameterFeature label
Anti-rust coated hat: Salt spray 240 h
1 × Feature labelSpecifications
Example specifications
These are example values. Replace them with your product’s verified measurements and specifications.
Values shown in the image
- Outside dia. (OD)
- 280 mm
- Bore Ø
- 68 mm
- PCD
- Ø 114.3 mm
- Thickness / min.
- 22 / 20 mm
Dimension2
| Annotation | Value |
|---|---|
| Outside dia. (OD) | 280 mm |
| Bore Ø | 68 mm |
Specification table1
| Annotation | Value |
|---|---|
| Specifications | |
| OE reference | (your OE no.) |
| Vehicle fitment | (your models) |
| Thickness / min. | 22 / 20 mm |
| Bolt holes (qty × Ø) | 5 × Ø14 mm |
| Material | HT250 grey cast iron |
| Type | Vented disc |
| Surface finish | Anti-rust coating |
| Net weight | 6.8 kg |
| Packing | Colour box, 2 / carton |
Diameter1
| Annotation | Value |
|---|---|
| PCD | Ø 114.3 mm |
Feature label1
| Annotation | Value |
|---|---|
| Anti-rust coated hat | Salt spray 240 h |
Getting started
From this example to your product
- 01
Open the template
Start with this editable example in the SizeMarker editor.
- 02
Add your product photo
Replace the image and adjust the markers to fit your product.
- 03
Check and export
Enter your actual measurements and specifications, check every label, then export.
FAQ
Frequently asked questions
What does this brake disc template show?
It marks a 280 mm outside diameter, a 68 mm bore and a 114.3 mm PCD, lists thickness, bolt holes, material, finish and packing in a spec table, and labels the anti-rust coated hat.
Can I use my own brake disc photo?
Yes. Open the template in SizeMarker, replace the photo, move each marker onto your part and edit the values, labels and styles. Check every value against your part before exporting.
Why are OE reference and vehicle fitment left blank?
They depend on your part, so the table keeps them as placeholders for your OE numbers and verified vehicle models. The other values are examples to replace as well.
Make it yours
Use this template
Keep the layout. Add your photo and specifications.