Dimension
Outer dia. D: 52 mm · Bore d: 25 mm
2 × DimensionSize Labels
Deep groove ball bearing annotation template
Bearing example for bearing suppliers: outer diameter and bore lines on a 6205-2RS, plus a spec table with width, seals, cage, precision, clearance and load.
Make it yours
Keep the layout. Add your photo and specifications.
Template overview
What this template includes
This deep groove ball bearing template has 3 annotations: outer diameter and bore lines and a specification table. The values are examples, not measurements of your product.
Specification table
Specifications: Model: 6205-2RS · Width B: 15 mm · Type: Deep groove ball
1 × Specification tableSpecifications
Example specifications
These are example values. Replace them with your product’s verified measurements and specifications.
Values shown in the image
- Outer dia. D
- 52 mm
- Bore d
- 25 mm
- Model
- 6205-2RS
- Width B
- 15 mm
Dimension2
| Annotation | Value |
|---|---|
| Outer dia. D | 52 mm |
| Bore d | 25 mm |
Specification table1
| Annotation | Value |
|---|---|
| Specifications | |
| Model | 6205-2RS |
| Width B | 15 mm |
| Type | Deep groove ball |
| Seals | 2RS rubber seals |
| Cage | Steel cage |
| Precision class | P0 |
| Clearance | C3 |
| Dynamic load rating | 14.0 kN |
Getting started
From this example to your product
- 01
Open the template
Start with this editable example in the SizeMarker editor.
- 02
Add your product photo
Replace the image and adjust the markers to fit your product.
- 03
Check and export
Enter your actual measurements and specifications, check every label, then export.
FAQ
Frequently asked questions
What does this deep groove ball bearing template show?
It marks a 52 mm outer diameter D and a 25 mm bore d, and lists model 6205-2RS, 15 mm width B, 2RS rubber seals, steel cage, P0 precision, C3 clearance and a 14.0 kN dynamic load rating.
Can I use my own bearing photo?
Yes. Open the template in SizeMarker, replace the photo, move each line onto your bearing and edit the values, labels and styles. Check every value against your product before exporting.
Can I use these values for my product?
No. The model, sizes and ratings are examples. Take the load rating from your own catalogue or test data, and replace every value before exporting.
Make it yours
Use this template
Keep the layout. Add your photo and specifications.