Dimensions / Industrial & logistics / Shipping labels / A6 label

A6 Shipping Label Size: 105 × 148 mm, DPD and GS1 Rules, Rolls and Printers

An A6 label is 105 × 148 mm, the ISO 216 A-size. DPD makes it the minimum for parcel labels, Geopost’s minilabel is A6, and GS1 lists A6 for a logistic label carrying an SSCC with little else. It is 3.4 mm wider and 4.4 mm shorter than 4 × 6 in (101.6 × 152.4 mm), and GS1 lists the two separately. A6 rolls run on a 108 mm liner with a 2.813 mm gap (Labelident), exactly the 108 mm a Zebra ZD421 takes; an SSCC at GS1’s 0.495 mm minimum bar is 87.1 mm wide with quiet zones.

Label: width × height (ISO 216 A6)GS1’s inch name for itRoll liner (Labelident); ZD421 widest media
105 × 148mm4.1 × 5.8in108mm108 mm

Sources: DPD, GS1, Labelident. Checked October 2026.

A6 (105 × 148 mm) shipping label with its usual width, depth and height marked
Annotated in SizeMarkerOpen this image in the editor →The carton is an illustration; the labels show the A6 size, not a measurement of this label.Free to use with a link back:

Will your label fit?

An SSCC barcode, a carton and Labelident’s 350-label A6 roll on a Zebra ZD421 are filled in. Enter your own; each check follows a rule or figure on this page.

A6 label

mm
mm
dots

Your carton

mm
mm
mm

Your printer and roll

mm
mm
mm
mm
mm
mm
mm

The barcode runs across the label width. With quiet zones it is (11N + 66) narrowest bars wide (GS1 General Specifications): 176 for an SSCC, 264 for a 34-digit IMpb. The narrowest bar has to be a whole number of printer dots.

Barcode fits the labelFits

4 dots at 203 dpi make the narrowest bar 0.500 mm (19.69 mil), inside GS1’s 0.495–0.940 mm. With quiet zones the SSCC barcode is 176 of those, 88 mm, within the 105 mm label.

An SSCC at 203 dpi with 4 dots a bar (0.5 mm) is filled in, just over GS1’s 0.495 mm minimum. At 3 dots (0.375 mm) the bars are thinner than GS1 allows, though that is DPD’s own size.

Label fits the cartonFits

With 20 mm clear all round, the 105 × 148 mm label needs a face of 145 × 188 mm; the 400 × 300 mm face has room.

A 400 × 300 mm carton top is filled in. DPD puts the largest face down and the label on the upper side.

Roll fits the printerFits

The 108 mm liner fits the printer’s 108 mm media width and the 102 mm roll its 127 mm maximum. At 0.144 mm a turn, the roll holds about 352 labels.

Labelident’s 350-label A6 roll sits on a 108 mm liner: it fits the ZD421’s 108 mm with nothing to spare, and a Brother QL-1100 (102 mm) takes no A6 roll.

Selling A6 labels or printers? Photograph the roll or a labelled carton, mark the label and liner in SizeMarker and send it with your quote.

Mark a photo

Who names A6

Carrier or standardWhat it says
DPDParcel Label Specification 2.4.1Labels must as a minimum be DIN EN ISO 216 A6, equivalent to 105x148 mm; on the upper side, with the largest area face down
GeopostGeoLabel 6.0The minilabel is A6 (105 x 148 mm); thermal barcode 80 to 91.5 mm wide and 25 mm tall, X 0.375 to 0.4 mm, quiet zones 5 mm
DPD RomaniaThe routing label must be A6 (105x148 mm)
GS1 Logistic Label Guideline 1.3Release of July 2019A6 (105 mm x 148 mm) or 4 x 6 inch for the SSCC with limited data; A5 (148 mm x 210 mm) or 6 x 8 inch for more
GS1 General Specifications R26A6 and 4 x 6 inch (101.6 × 152.4 mm, our conversion) as separate bullets; the guideline’s appendix calls A6 4.1 x 5.8 inch
A6 against 4 × 6Our subtraction105 × 148 mm against 101.6 × 152.4 mm: 3.4 mm wider, 4.4 mm shorter
DHL ExpressMyDHL API 3.4.0An A6 template, ECOM26_A6_002, besides the default ECOM26_84_001; no sizes given
DHL PaketGermany103 x 199 mm thermal labels on a 106.5 mm liner; 105 x 208 mm on an A5 laser sheet
GLS Czech RepublicThermo 97 x 147 mm on a roll; adhesive labels, 4 per A4
GLS DenmarkCalls its label A6 but means 4x6 inches; recommends the Zebra ZD421D

Sources: DPD · Geopost · DPD Romania · GS1 · GS1 · DHL Express · DHL Paket · GLS · GLS

Real A6 rolls and sheets

ProductLabels; coreRoll diameter; roll length
Labelident ERT-E105X148Z1-P350This page350; 1 in (25.4 mm)102 mm; 52.8 m
Labelident ERT-E105X148Z40-P500500; 40 mm125 mm; 75.4 m
Labelident ERT-E105X148-PIndustrial, liner perforated1,000; 3 in (76.2 mm)184 mm; 150.8 m
Labelident ERT-E105X148-2952Large roll2,952; 3 in295 mm; 445.2 m
Every Labelident A6 rollLiner 108 mmGap 2.813 mm
Herma 10809gLabels template data105 x 148 mm, 4 per A4 sheet—

Sources: Labelident · Labelident · Labelident · Labelident · gLabels

Printers and barcodes on A6

ItemFigure
Zebra ZD421Our comparison with its media and print widthsDirect-thermal media up to 108 mm, so an A6 roll fits with nothing to spare; print width 104 mm at 203 dpi leaves about 1 mm unprinted, 106 mm at 300 dpi covers it
Zebra ZT411Web 108 mm for peel and rewind, 114 mm for tear or cutter
Brother QL-1100Max label width 102 mm (~4"): no A6 roll
SSCC barcode widthGS1; our calculation176 narrowest bars with quiet zones: 87.1 mm at 0.495 mm; the widest bar that still fits 105 mm is 0.597 mm
GS1 bar sizesGeneral Specifications, table 5X 0.495 to 0.940 mm; bars at least 31.75 mm tall; quiet zones 10 X
Dots at 203 dpiOur calculation, Zebra dot pitch 0.125 mm3 dots 0.375 mm (DPD’s size); 4 dots 0.500 mm, the first to reach GS1’s 0.495 mm
DPD barcodeX 375 µm; quiet zones at least 5 mm; at least 25 mm tall; X a multiple of the printer’s dot
Text on the labelGS1No text under 3 mm high; data at least 7 mm

Sources: Zebra · Zebra · Zebra · Brother · GS1 · DPD · GS1

Other shipping label sizes

Questions

What size is an A6 label?

105 × 148 mm, about 4.1 × 5.8 in in GS1’s appendix. DPD sets it as the minimum for parcel labels.

Is A6 the same as 4x6?

No. 4 × 6 in is 101.6 × 152.4 mm, so A6 is 3.4 mm wider and 4.4 mm shorter. GS1’s General Specifications list them separately, although GLS Denmark and GS1’s 2019 guideline run the two together.

Which carriers use A6 labels?

DPD (A6 at the least, and DPD Romania requires it), Geopost for its minilabel, and DHL Express as an option (template ECOM26_A6_002). DHL Paket uses 103 × 199 mm instead.

Will an A6 roll fit my label printer?

Only if the printer takes 108 mm media: Labelident’s A6 rolls sit on a 108 mm liner, which a Zebra ZD421 takes exactly. A Brother QL-1100 stops at 102 mm.

How many A6 labels are on a roll?

350 on a 1 in core and a 102 mm roll, 500 on a 40 mm core, 1,000 on a 3 in core and 2,952 on a 295 mm roll (Labelident).

For makers of A6 labels and printers

Buyers ask whether the label is true A6 or 4 × 6, the liner width and the gap, the core and roll diameter, labels a roll, whether the liner is perforated, the temperature range and which carriers and printers it suits. Mark the real roll, the label and the liner on your own photo in SizeMarker, as in the picture at the top, and send one product card for WhatsApp or WeChat.

Spec diagram maker →See examples →

Shipping the parcel

Volumetric weight calculatorDimensional weight of the labelled carton

Sources

  1. DPD Parcel Label Specification, version 2.4.1 (19 January 2021)Minimum format, barcode and placement. Version of 19 January 2021, checked 27 October 2026.
  2. Geopost GeoLabel barcode and label layout specification, version 6.0 (30 October 2024)Minilabel format and barcode sizes. Version of 30 October 2024, checked 27 October 2026.
  3. DPD Romania: routing label specificationRouting label format. Checked 27 October 2026.
  4. GS1 Logistic Label Guideline, release 1.3 (July 2019)Label sizes and placement. Release of July 2019, checked 27 October 2026.
  5. GS1 General Specifications, release 26.0 (January 2026)Label sizes, bar sizes and symbol length. Release of January 2026, checked 27 October 2026.
  6. DHL Developer Portal: MyDHL API 3.4.0 OpenAPI specification (label templates)Label templates. Specification of October 2026, checked 27 October 2026.
  7. DHL Paket (Germany): shipping labels for business customersThermal and laser label sizes and liner. Checked 27 October 2026.
  8. GLS Czech Republic: parcel labelsLabel formats. Checked 27 October 2026.
  9. GLS Denmark: IT support FAQ (label format, printer)Label format and printer. Checked 27 October 2026.
  10. Labelident: direct thermal labels 105 × 148 mm, 1 in core, 350 labels, ERT-E105X148Z1-P350Labels, core, roll diameter, roll length, liner and gap of P350. Checked 27 October 2026.
  11. Labelident: direct thermal labels 105 × 148 mm, 40 mm core, 500 labels, ERT-E105X148Z40-P500Labels, core, roll diameter and roll length of P500. Checked 27 October 2026.
  12. Labelident: direct thermal labels 105 × 148 mm, 3 in core, 1,000 labels, ERT-E105X148-PLabels, core, roll diameter, roll length and perforation of the 1,000-label roll. Checked 27 October 2026.
  13. Labelident: direct thermal labels 105 × 148 mm, 3 in core, 2,952 labels, ERT-E105X148-2952Labels, core, roll diameter and roll length of the large roll. Checked 27 October 2026.
  14. gLabels template data: Herma ISO templates (Herma 10809, 105 × 148 mm, 4 per sheet)Herma 10809 layout. Checked 27 October 2026.
  15. Zebra: ZD421 and ZD621 user guide, media and print specificationsMedia widths and dot pitch. Checked 27 October 2026.
  16. Zebra: ZD421 desktop printer spec sheetPrint width at 203 and 300 dpi. Checked 27 October 2026.
  17. Zebra: ZT411 industrial printer tech specsWeb widths. Checked 27 October 2026.
  18. Brother USA: QL-1100 wide format label printerMaximum label width. Checked 27 October 2026.
A6 Shipping Label Size: 105 x 148 mm, Carriers, Rolls, Printers