Seller Growth
Made-to-Measure Orders: Lock These 6 Things Before Quoting
The made-to-measure order process: who owns a wrong dimension, opening vs product size, the change freeze point, and when custom goods lose the 14-day return right.
أفكار وتجارب
نصائح وأدلة لتوضيح أبعاد منتجاتك بالصور
المقاس والملاءمة
Tolerance Stack-Up Explained: 5 Good Parts, 1 Bad Fit
Tolerance stack-up explained: 5 parts at ±0.5 mm give ±2.5 mm worst case but ±1.118 mm RSS. When each method is right, and why ISO 2768-mK is now half obsolete.
Photography
How to Photograph a Product for Measurement: 4 Setups
How to photograph a product for measurement: lens distortion and perspective error are different problems. At 1 m, 100 mm of depth costs 11% in size. Four setups ranked.
المقاس والملاءمة
Maximum Shelf Span Without Support: Where Shelves Sag
Maximum shelf span without support by material and thickness: 19 mm particleboard manages 700-760 mm at L/180. Span tables, creep, and four ways to buy back span.
Compliance
Rebar Size Designations: 6 Myths That Ship the Wrong Bar
Rebar size designations decoded: #4 is 12.7 mm not 4 mm, #13 is the same bar, and Grade 60, B500B and HRB400 are three different yield strengths.
B2B & Suppliers
What Bearing Numbers Mean: 6205 Is Three Dimensions
What bearing numbers mean: 6205 decodes to a 25 mm bore, 52 mm OD and 15 mm width under ISO 15. Bore-code table, dimension series, suffixes and what to quote.
التحويل
Wardrobe Internal Dimensions: The 6 Numbers Buyers Ask For
Wardrobe internal dimensions decide whether coats fit: clear depth, long-hang and short-hang heights, rail clearance, shelf depth and load — the numbers listings omit.
Returns
Door Handing: How to Determine It Before the Container Ships
How to determine door handing when ANSI, US residential and DIN conventions disagree: three reference sides, five order scenarios, and the diagram that ends disputes.
B2B & Suppliers
Sheet Metal Gauge to mm: 16 Gauge Is Four Thicknesses
Sheet metal gauge to mm depends on the metal: 16 gauge is 1.52 mm in steel, 1.61 mm galvanized, 1.59 mm stainless, 1.29 mm aluminium. Four tables compared.
Returns
Assembly Instructions for Flat Pack Furniture: 4 Formats
Assembly instructions for flat pack furniture decide your "missing parts" return rate. Four formats compared against IEC 82079-1, the GPSR language rule and cost.
المقاس والملاءمة
Rough Opening vs Unit Size: The 3 Numbers on Every Order
Rough opening vs unit size is why correct windows get rejected on site. The three fenestration numbers, allowances by market, and the egress number nobody prints.
B2B & Suppliers
Wood Moisture Content for Export Furniture: 6 Answers
Wood moisture content for export furniture decides whether a table lands flat or cracked. Six questions answered with real EMC numbers by destination market.